Textdoc
Zipdoc
Writeurl
Loading…
MINER 1 Booting Linux on physical CPU 0x0 Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 198656K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 30720K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090c424 (9234 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 17680K (cc9bc000 - cdb00000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Broadcom BCM5241 e000b000.etherne:00: attached PHY driver [Broadcom BCM5241] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAEAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 46/22, WL threshold: 4096, image sequence number: 1700683360 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): recovery needed UBIFS (ubi0:0): recovery completed UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID DE358760-70F6-4E4A-A9A6-9180402E996C, small LPT model ubi1: attaching mtd5 ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 4098/1011, WL threshold: 4096, image sequence number: 3472465357 ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 ubi1: background thread "ubi_bgt1d" started, PID 720 UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 UBIFS (ubi1:0): recovery needed UBIFS (ubi1:0): recovery completed UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 1F78C1AD-00BF-47DC-BE10-721C23946F2C, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb38000 *base_vir_addr = 0xab00d In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized [2022-07-20 09:54:08.382] httpListenThread start ret=0 [2022-07-20 09:54:38.382] start listen on 6060 ... [2022-07-20 09:59:34.481] setStartTimePoint total_tv_start_sys=367 total_tv_end_sys=368 2022-07-20 09:54:08 driver-btm-soc.c:6490:bitmain_soc_init: This is Antminer S9 SE scan user version 2022-07-20 09:54:08 driver-btm-soc.c:6496:bitmain_soc_init: special mode: disabled 2022-07-20 09:54:08 driver-btm-soc.c:6503:bitmain_soc_init: This is high performance mode 2022-07-20 09:54:08 driver-btm-soc.c:6508:bitmain_soc_init: last commit version: 9df023c commit time: 2019-07-25 12:01:46 build: 2019-07-28 21:25:53 2022-07-20 09:54:08 driver-btm-soc.c:6529:bitmain_soc_init: Detect 256MB control board of XILINX 2022-07-20 09:54:08 driver-btm-soc.c:6532:bitmain_soc_init: Miner compile time: Sun Jul 28 21:17:06 CST 2019 type: Antminer S9 SE 2022-07-20 09:54:08 driver-btm-soc.c:838:check_chain: get_hash_on_plug is 0x7 2022-07-20 09:54:08 driver-btm-soc.c:850:check_chain: !! chain[0]is exist 2022-07-20 09:54:08 driver-btm-soc.c:850:check_chain: !! chain[1]is exist 2022-07-20 09:54:08 driver-btm-soc.c:850:check_chain: !! chain[2]is exist 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fc 28 fc ff 00000080 ff ff ff ff ff ff ff a5 5c 5c 5c 5c 5c 5c 5c 5c 00000090 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 000000a0 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 000000b0 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 000000c0 5c 5c 5c 5c 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff 69 16 00 00 60 ff ff ff 39 10 1e 51 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fc 28 fc ff 00000080 ff ff ff ff ff ff ff a5 5c 5c 5c 5c 5c 5c 59 5c 00000090 57 59 59 5c 5c 57 59 5c 5c 5c 5c 5c 5c 5c 5c 5c 000000a0 5c 5c 5c 59 59 57 57 59 59 5c 5c 5c 5c 5c 5c 5c 000000b0 5c 5c 5c 5c 5c 5c 5c 59 59 57 57 59 59 5c 5c 5c 000000c0 5c 5c 5c 5c 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff 26 16 00 00 60 ff ff ff 39 10 78 ca 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fb 28 fc ff 00000080 ff ff ff ff ff ff ff a5 5c 5c 5c 5c 5c 5c 5c 5c 00000090 5c 57 5c 5c 5c 5c 5c 5c 57 5c 5c 5c 5c 5c 5c 5c 000000a0 5c 5c 5c 5c 5c 57 5c 5c 5c 5c 5c 5c 5c 5c 5c 57 000000b0 5c 5c 57 5c 5c 5c 5c 5c 5c 5c 57 5c 5c 5c 5c 5c 000000c0 5c 5c 5c 5c 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff 4b 16 00 00 60 ff ff ff 39 10 59 0f read chain[0] hardware info: major type: 0 minor type: 4 chip level: 1 bom version: 0x10 pcb version: 0x39 fixture 8pattern result: L0 read chain[1] hardware info: major type: 0 minor type: 4 chip level: 1 bom version: 0x10 pcb version: 0x39 fixture 8pattern result: L0 read chain[2] hardware info: major type: 0 minor type: 4 chip level: 1 bom version: 0x10 pcb version: 0x39 fixture 8pattern result: L0 sweep config for eco mode: sweep_start_voltage: 8.60 max_aging_voltage: 8.90 sweep_min_freq: 300M sweep_max_freq: 380M sweep config for hpf mode: sweep_start_voltage: 9.30 max_aging_voltage: 9.60 sweep_min_freq: 415M sweep_max_freq: 465M 2022-07-20 09:54:20 driver-btm-soc.c:838:check_chain: get_hash_on_plug is 0x7 2022-07-20 09:54:20 driver-btm-soc.c:850:check_chain: !! chain[0]is exist 2022-07-20 09:54:20 driver-btm-soc.c:850:check_chain: !! chain[1]is exist 2022-07-20 09:54:20 driver-btm-soc.c:850:check_chain: !! chain[2]is exist 2022-07-20 09:54:20 driver-btm-soc.c:5935:get_freq_result_from_eeprom: orginal chip freq: chain 0 freq: 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 chain 1 freq: 460 460 460 460 460 460 445 460 435 445 445 460 460 435 445 460 460 460 460 460 460 460 460 460 460 460 460 445 445 435 435 445 445 460 460 460 460 460 460 460 460 460 460 460 460 460 460 445 445 435 435 445 445 460 460 460 460 460 460 460 chain 2 freq: 460 460 460 460 460 460 460 460 460 435 460 460 460 460 460 460 435 460 460 460 460 460 460 460 460 460 460 460 460 435 460 460 460 460 460 460 460 460 460 435 460 460 435 460 460 460 460 460 460 460 435 460 460 460 460 460 460 460 460 460 2022-07-20 09:54:20 driver-btm-soc.c:6618:bitmain_soc_init: reset all... 2022-07-20 09:54:22 driver-btm-soc.c:6626:bitmain_soc_init: miner ID : 800cf4825c208814 2022-07-20 09:54:22 driver-btm-soc.c:6329:init_miner_version: FPGA Version = 0xB00D 2022-07-20 09:54:41 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[0] PIC software version: 177 2022-07-20 09:54:42 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[1] PIC software version: 177 2022-07-20 09:54:42 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[2] PIC software version: 177 2022-07-20 09:54:42 power.c:183:power_init: power init ... 2022-07-20 09:54:42 driver-btm-soc.c:5048:get_working_voltage_from_eeprom: get working vol [ 9.60] from chain[0] eeprom 2022-07-20 09:54:42 power.c:230:set_working_voltage_by_chain: chain[0] working_voltage = 9.600000 2022-07-20 09:54:42 driver-btm-soc.c:5048:get_working_voltage_from_eeprom: get working vol [ 9.60] from chain[1] eeprom 2022-07-20 09:54:42 power.c:230:set_working_voltage_by_chain: chain[1] working_voltage = 9.600000 2022-07-20 09:54:42 driver-btm-soc.c:5048:get_working_voltage_from_eeprom: get working vol [ 9.60] from chain[2] eeprom 2022-07-20 09:54:42 power.c:230:set_working_voltage_by_chain: chain[2] working_voltage = 9.600000 2022-07-20 09:54:42 driver-btm-soc.c:5724:update_highest_voltage: chain 0 hpf working voltage 9.30 2022-07-20 09:54:42 driver-btm-soc.c:5724:update_highest_voltage: chain 1 hpf working voltage 9.30 2022-07-20 09:54:42 driver-btm-soc.c:5724:update_highest_voltage: chain 2 hpf working voltage 9.30 2022-07-20 09:54:42 driver-btm-soc.c:5733:update_highest_voltage: open core at max voltage 10.04 2022-07-20 09:54:42 power.c:779:set_iic_power_to_highest_voltage_by_chain: chain[0] setting to hightest voltage: 10.04 ... 2022-07-20 09:54:43 power.c:705:set_iic_power_by_voltage: now setting voltage to : 10.044000 2022-07-20 09:54:43 power.c:779:set_iic_power_to_highest_voltage_by_chain: chain[1] setting to hightest voltage: 10.04 ... 2022-07-20 09:54:45 power.c:705:set_iic_power_by_voltage: now setting voltage to : 10.044000 2022-07-20 09:54:46 power.c:779:set_iic_power_to_highest_voltage_by_chain: chain[2] setting to hightest voltage: 10.04 ... 2022-07-20 09:54:46 power.c:705:set_iic_power_by_voltage: now setting voltage to : 10.044000 2022-07-20 09:54:47 driver-btm-soc.c:1186:get_eeprom_total_hash_rate: chain[0] hash rate = 5737 2022-07-20 09:54:47 driver-btm-soc.c:1186:get_eeprom_total_hash_rate: chain[1] hash rate = 5670 2022-07-20 09:54:47 driver-btm-soc.c:1186:get_eeprom_total_hash_rate: chain[2] hash rate = 5707 2022-07-20 09:54:47 driver-btm-soc.c:1190:get_eeprom_total_hash_rate: total rate = 17114 2022-07-20 09:54:47 driver-btm-soc.c:1198:get_ideal_hash_rate: get ideal hash rate 17000 2022-07-20 09:54:47 eeprom.c:669:travel_eeprom_store: chain[0] data in eeprom is: magic number: 0x7e freq data per ASIC: IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275 IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275 IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275 IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275 IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275 IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275 voltage: 11.10 V hash rate: -0001 GH/s freq data per ASIC in mode2: IC[000]:460 IC[001]:460 IC[002]:460 IC[003]:460 IC[004]:460 IC[005]:460 IC[006]:460 IC[007]:460 IC[008]:460 IC[009]:460 IC[010]:460 IC[011]:460 IC[012]:460 IC[013]:460 IC[014]:460 IC[015]:460 IC[016]:460 IC[017]:460 IC[018]:460 IC[019]:460 IC[020]:460 IC[021]:460 IC[022]:460 IC[023]:460 IC[024]:460 IC[025]:460 IC[026]:460 IC[027]:460 IC[028]:460 IC[029]:460 IC[030]:460 IC[031]:460 IC[032]:460 IC[033]:460 IC[034]:460 IC[035]:460 IC[036]:460 IC[037]:460 IC[038]:460 IC[039]:460 IC[040]:460 IC[041]:460 IC[042]:460 IC[043]:460 IC[044]:460 IC[045]:460 IC[046]:460 IC[047]:460 IC[048]:460 IC[049]:460 IC[050]:460 IC[051]:460 IC[052]:460 IC[053]:460 IC[054]:460 IC[055]:460 IC[056]:460 IC[057]:460 IC[058]:460 IC[059]:460 voltage in mode2: 9.30 V hash rate in mode2: 05737 GH/s 2022-07-20 09:54:47 eeprom.c:669:travel_eeprom_store: chain[1] data in eeprom is: magic number: 0x7e freq data per ASIC: IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275 IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275 IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275 IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275 IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275 IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275 voltage: 11.10 V hash rate: -0001 GH/s freq data per ASIC in mode2: IC[000]:460 IC[001]:460 IC[002]:460 IC[003]:460 IC[004]:460 IC[005]:460 IC[006]:445 IC[007]:460 IC[008]:435 IC[009]:445 IC[010]:445 IC[011]:460 IC[012]:460 IC[013]:435 IC[014]:445 IC[015]:460 IC[016]:460 IC[017]:460 IC[018]:460 IC[019]:460 IC[020]:460 IC[021]:460 IC[022]:460 IC[023]:460 IC[024]:460 IC[025]:460 IC[026]:460 IC[027]:445 IC[028]:445 IC[029]:435 IC[030]:435 IC[031]:445 IC[032]:445 IC[033]:460 IC[034]:460 IC[035]:460 IC[036]:460 IC[037]:460 IC[038]:460 IC[039]:460 IC[040]:460 IC[041]:460 IC[042]:460 IC[043]:460 IC[044]:460 IC[045]:460 IC[046]:460 IC[047]:445 IC[048]:445 IC[049]:435 IC[050]:435 IC[051]:445 IC[052]:445 IC[053]:460 IC[054]:460 IC[055]:460 IC[056]:460 IC[057]:460 IC[058]:460 IC[059]:460 voltage in mode2: 9.30 V hash rate in mode2: 05670 GH/s 2022-07-20 09:54:47 eeprom.c:669:travel_eeprom_store: chain[2] data in eeprom is: magic number: 0x7e freq data per ASIC: IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275 IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275 IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275 IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275 IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275 IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275 voltage: 11.10 V hash rate: -0001 GH/s freq data per ASIC in mode2: IC[000]:460 IC[001]:460 IC[002]:460 IC[003]:460 IC[004]:460 IC[005]:460 IC[006]:460 IC[007]:460 IC[008]:460 IC[009]:435 IC[010]:460 IC[011]:460 IC[012]:460 IC[013]:460 IC[014]:460 IC[015]:460 IC[016]:435 IC[017]:460 IC[018]:460 IC[019]:460 IC[020]:460 IC[021]:460 IC[022]:460 IC[023]:460 IC[024]:460 IC[025]:460 IC[026]:460 IC[027]:460 IC[028]:460 IC[029]:435 IC[030]:460 IC[031]:460 IC[032]:460 IC[033]:460 IC[034]:460 IC[035]:460 IC[036]:460 IC[037]:460 IC[038]:460 IC[039]:435 IC[040]:460 IC[041]:460 IC[042]:435 IC[043]:460 IC[044]:460 IC[045]:460 IC[046]:460 IC[047]:460 IC[048]:460 IC[049]:460 IC[050]:435 IC[051]:460 IC[052]:460 IC[053]:460 IC[054]:460 IC[055]:460 IC[056]:460 IC[057]:460 IC[058]:460 IC[059]:460 voltage in mode2: 9.30 V hash rate in mode2: 05707 GH/s 2022-07-20 09:54:47 driver-btm-soc.c:6669:bitmain_soc_init: fan_eft : 0 fan_pwm : 0 2022-07-20 09:54:47 driver-btm-soc.c:6358:bring_up_chain: bring up chain 0 2022-07-20 09:54:48 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff 2022-07-20 09:55:19 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe 2022-07-20 09:55:20 driver-btm-soc.c:3991:check_asic_num: without pre_open_core chain 0, find asic num = 60 2022-07-20 09:55:24 driver-btm-soc.c:4804:set_freq_by_chain: chain[0] set freq:100.00 2022-07-20 09:55:25 driver-btm-soc.c:3917:pre_open_core_one_chain: for chain 0 2022-07-20 09:55:25 driver-btm-soc.c:4078:set_clock_delay_control: core_data = 0x06 2022-07-20 09:55:25 temperature.c:604:is_eeprom_tempsensor_data_correct: sensor_num 2, sensor pos = 31, 40, 0, 0 2022-07-20 09:55:25 temperature.c:513:is_tempsensor_data_correct: Bad,temp_info.type = 0 2022-07-20 09:55:25 temperature.c:741:calibration_sensor_offset: chain[0] temp info is bad, reload from eeprom.. sensor type = 1,sensor num = 2 sensor pos: 31 40 0 0 0 0 sensor offset: -4 -4 0 0 0 0 2022-07-20 09:55:25 temperature.c:791:calibration_sensor_offset: Chain[0] chip[31] middle temp offset=-4, typeID=55 2022-07-20 09:55:26 temperature.c:791:calibration_sensor_offset: Chain[0] chip[40] middle temp offset=-4, typeID=55 2022-07-20 09:55:26 driver-btm-soc.c:6358:bring_up_chain: bring up chain 1 2022-07-20 09:55:27 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe 2022-07-20 09:55:58 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 2022-07-20 09:55:59 driver-btm-soc.c:3991:check_asic_num: without pre_open_core chain 1, find asic num = 60 2022-07-20 09:56:03 driver-btm-soc.c:4804:set_freq_by_chain: chain[1] set freq:100.00 2022-07-20 09:56:04 driver-btm-soc.c:3917:pre_open_core_one_chain: for chain 1 2022-07-20 09:56:04 driver-btm-soc.c:4078:set_clock_delay_control: core_data = 0x06 2022-07-20 09:56:04 temperature.c:604:is_eeprom_tempsensor_data_correct: sensor_num 2, sensor pos = 31, 40, 0, 0 2022-07-20 09:56:04 temperature.c:513:is_tempsensor_data_correct: Bad,temp_info.type = 0 2022-07-20 09:56:04 temperature.c:741:calibration_sensor_offset: chain[1] temp info is bad, reload from eeprom.. sensor type = 1,sensor num = 2 sensor pos: 31 40 0 0 0 0 sensor offset: -4 -4 0 0 0 0 2022-07-20 09:56:04 temperature.c:791:calibration_sensor_offset: Chain[1] chip[31] middle temp offset=-4, typeID=55 2022-07-20 09:56:05 temperature.c:791:calibration_sensor_offset: Chain[1] chip[40] middle temp offset=-4, typeID=55 2022-07-20 09:56:05 driver-btm-soc.c:6358:bring_up_chain: bring up chain 2 2022-07-20 09:56:06 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 2022-07-20 09:56:37 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2022-07-20 09:56:39 driver-btm-soc.c:3991:check_asic_num: without pre_open_core chain 2, find asic num = 60 2022-07-20 09:56:42 driver-btm-soc.c:4804:set_freq_by_chain: chain[2] set freq:100.00 2022-07-20 09:56:43 driver-btm-soc.c:3917:pre_open_core_one_chain: for chain 2 2022-07-20 09:56:43 driver-btm-soc.c:4078:set_clock_delay_control: core_data = 0x06 2022-07-20 09:56:43 temperature.c:604:is_eeprom_tempsensor_data_correct: sensor_num 2, sensor pos = 31, 40, 0, 0 2022-07-20 09:56:43 temperature.c:513:is_tempsensor_data_correct: Bad,temp_info.type = 0 2022-07-20 09:56:43 temperature.c:741:calibration_sensor_offset: chain[2] temp info is bad, reload from eeprom.. sensor type = 1,sensor num = 2 sensor pos: 31 40 0 0 0 0 sensor offset: -5 -4 0 0 0 0 2022-07-20 09:56:43 temperature.c:791:calibration_sensor_offset: Chain[2] chip[31] middle temp offset=-5, typeID=55 2022-07-20 09:56:44 temperature.c:791:calibration_sensor_offset: Chain[2] chip[40] middle temp offset=-4, typeID=55 2022-07-20 09:56:44 asic.c:1153:set_baud: set baud=1 2022-07-20 09:56:44 asic.c:1269:set_asic_ticket_mask: set ticket mask 63 2022-07-20 09:56:45 temperature.c:1933:detect_startup_environment_temperature: Environment temperature: [34] 2022-07-20 09:56:45 temperature.c:1943:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 1 times ... 2022-07-20 09:56:56 temperature.c:1933:detect_startup_environment_temperature: Environment temperature: [34] 2022-07-20 09:56:56 temperature.c:1943:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 2 times ... 2022-07-20 09:57:07 temperature.c:1933:detect_startup_environment_temperature: Environment temperature: [34] 2022-07-20 09:57:07 temperature.c:1943:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 3 times ... 2022-07-20 09:57:17 driver-btm-soc.c:4148:open_core_bm1393: Start Open Core!! 2022-07-20 09:57:24 driver-btm-soc.c:4215:open_core_bm1393: End Open Core!! 2022-07-20 09:57:24 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 125 2022-07-20 09:57:25 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 150 2022-07-20 09:57:26 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 175 2022-07-20 09:57:27 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 200 2022-07-20 09:57:28 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 225 2022-07-20 09:57:29 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 250 2022-07-20 09:57:30 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 275 2022-07-20 09:57:31 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 300 2022-07-20 09:57:32 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 325 2022-07-20 09:57:33 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 350 2022-07-20 09:57:34 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 375 2022-07-20 09:57:35 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 400 2022-07-20 09:57:36 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 425 2022-07-20 09:57:37 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 450 2022-07-20 09:57:38 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 460 2022-07-20 09:57:39 driver-btm-soc.c:5365:increase_freq_by_eeprom_slowly_by_chain: max = 460 ,min = 460 2022-07-20 09:57:39 driver-btm-soc.c:5371:increase_freq_by_eeprom_slowly_by_chain: chain[0] increaseing the diff freq ... 2022-07-20 09:57:39 driver-btm-soc.c:5400:increase_freq_by_eeprom_slowly_by_chain: chain 0 final freq setting: 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 2022-07-20 09:57:39 power.c:1303:slowly_set_working_power_t11: set chain 0 to working voltage: now setting chain[0]-volt[10.04]-data[014] now setting chain[0]-volt[09.99]-data[015] now setting 2022-07-20 09:57:45 dspic33ep16gs202.c:213:dsPIC33EP16GS202_pic_heart_beat: ERROR! failed on Chain[0] after 3 times try! chain[0]-volt[09.94]-data[016] now setting chain[0]-volt[09.89]-data[017] now setting chain[0]-volt[09.85]-data[018] now setting chain[0]-volt[09.76]-data[020] now setting chain[0]-volt[09.68]-data[022] now setting chain[0]-volt[09.65]-data[023] now setting chain[0]-volt[09.61]-data[024] 2022-07-20 09:58:05 power.c:1318:slowly_set_working_power_t11: done! 2022-07-20 09:58:05 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 125 2022-07-20 09:58:06 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 150 2022-07-20 09:58:07 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 175 2022-07-20 09:58:08 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 200 2022-07-20 09:58:09 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 225 2022-07-20 09:58:10 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 250 2022-07-20 09:58:11 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 275 2022-07-20 09:58:12 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 300 2022-07-20 09:58:13 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 325 2022-07-20 09:58:14 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 350 2022-07-20 09:58:15 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 375 2022-07-20 09:58:16 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 400 2022-07-20 09:58:17 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 425 2022-07-20 09:58:19 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 435 2022-07-20 09:58:20 driver-btm-soc.c:5365:increase_freq_by_eeprom_slowly_by_chain: max = 460 ,min = 435 2022-07-20 09:58:20 driver-btm-soc.c:5371:increase_freq_by_eeprom_slowly_by_chain: chain[1] increaseing the diff freq ... 2022-07-20 09:58:23 driver-btm-soc.c:5400:increase_freq_by_eeprom_slowly_by_chain: chain 1 final freq setting: 460 460 460 460 460 460 445 460 435 445 445 460 460 435 445 460 460 460 460 460 460 460 460 460 460 460 460 445 445 435 435 445 445 460 460 460 460 460 460 460 460 460 460 460 460 460 460 445 445 435 435 445 445 460 460 460 460 460 460 460 2022-07-20 09:58:23 power.c:1303:slowly_set_working_power_t11: set chain 1 to working voltage: now setting chain[1]-volt[10.04]-data[014] now setting chain[1]-volt[09.99]-data[015] now setting chain[1]-volt[09.94]-data[016] now setting chain[1]-volt[09.89]-data[017] now setting chain[1]-volt[09.85]-data[018] now setting 2022-07-20 09:58:39 dspic33ep16gs202.c:213:dsPIC33EP16GS202_pic_heart_beat: ERROR! failed on Chain[1] after 3 times try! chain[1]-volt[09.76]-data[020] now setting chain[1]-volt[09.68]-data[022] now setting chain[1]-volt[09.65]-data[023] now setting chain[1]-volt[09.61]-data[024] 2022-07-20 09:58:51 power.c:1318:slowly_set_working_power_t11: done! 2022-07-20 09:58:51 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 125 2022-07-20 09:58:52 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 150 2022-07-20 09:58:53 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 175 2022-07-20 09:58:54 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 200 2022-07-20 09:58:55 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 225 2022-07-20 09:58:56 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 250 2022-07-20 09:58:57 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 275 2022-07-20 09:58:58 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 300 2022-07-20 09:58:59 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 325 2022-07-20 09:59:00 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 350 2022-07-20 09:59:01 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 375 2022-07-20 09:59:02 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 400 2022-07-20 09:59:03 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 425 2022-07-20 09:59:04 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 435 2022-07-20 09:59:05 driver-btm-soc.c:5365:increase_freq_by_eeprom_slowly_by_chain: max = 460 ,min = 435 2022-07-20 09:59:05 driver-btm-soc.c:5371:increase_freq_by_eeprom_slowly_by_chain: chain[2] increaseing the diff freq ... 2022-07-20 09:59:09 driver-btm-soc.c:5400:increase_freq_by_eeprom_slowly_by_chain: chain 2 final freq setting: 460 460 460 460 460 460 460 460 460 435 460 460 460 460 460 460 435 460 460 460 460 460 460 460 460 460 460 460 460 435 460 460 460 460 460 460 460 460 460 435 460 460 435 460 460 460 460 460 460 460 435 460 460 460 460 460 460 460 460 460 2022-07-20 09:59:09 power.c:1303:slowly_set_working_power_t11: set chain 2 to working voltage: now setting chain[2]-volt[10.04]-data[014] now setting chain[2]-volt[09.99]-data[015] now setting chain[2]-volt[09.94]-data[016] now setting 2022-07-20 09:59:20 dspic33ep16gs202.c:276:dsPIC33EP16GS202_set_pic_voltage: ERROR! failed on Chain[2] after 3 times try! chain[2]-volt[09.89]-data[017] now setting chain[2]-volt[09.85]-data[018] now setting chain[2]-volt[09.76]-data[020] now setting chain[2]-volt[09.68]-data[022] now setting 2022-07-20 09:59:32 dspic33ep16gs202.c:276:dsPIC33EP16GS202_set_pic_voltage: ERROR! failed on Chain[2] after 3 times try! chain[2]-volt[09.65]-data[023] now setting chain[2]-volt[09.61]-data[024] 2022-07-20 09:59:33 power.c:1318:slowly_set_working_power_t11: done! 2022-07-20 09:59:33 driver-btm-soc.c:5100:set_timeout: freq 460 final timeout=284 2022-07-20 09:59:33 driver-btm-soc.c:2918:low_temp_process_parm_init: chip miner_type = [4] 2022-07-20 09:59:33 driver-btm-soc.c:2918:low_temp_process_parm_init: chip miner_type = [4] 2022-07-20 09:59:33 driver-btm-soc.c:2918:low_temp_process_parm_init: chip miner_type = [4] 2022-07-20 09:59:33 driver-btm-soc.c:3357:check_system_work: check system thread start... 2022-07-20 09:59:33 driver-btm-soc.c:3374:check_system_work: low_bringup_pcb_temp_threshhold = 28 2022-07-20 09:59:33 driver-btm-soc.c:3375:check_system_work: recovery_working_vol_low_temp = 30, recovery_working_vol_high_temp = 35 2022-07-20 09:59:33 driver-btm-soc.c:3376:check_system_work: delta_voltage = 0.10 2022-07-20 09:59:34 driver-btm-soc.c:6771:bitmain_soc_init: Init done! 2022-07-20 09:59:34 driver-btm-soc.c:7478:bitmain_soc_prepare: bitmain soc init success. 2022-07-20 09:59:34 util.c:2178:process_version_mask: Pool 0 Version num is 2 2022-07-20 09:59:34 util.c:2178:process_version_mask: Pool 0 Version num is 2 2022-07-20 09:59:35 temperature.c:1402:read_temp_func: bring_up_pcb_temp = 43 2022-07-20 09:59:35 driver-btm-soc.c:7153:send_job: Version num 2 2022-07-20 09:59:55 driver-btm-soc.c:3529:check_system_work: set reopen algorith parameters... 2022-07-20 10:01:36 driver-btm-soc.c:3277:decrease_voltage_at_high_temp: decrease volt for max chip temp is 103 2022-07-20 10:01:36 power.c:244:set_customer_voltage_by_chain: chain[0] customer_voltage = 9.410217 2022-07-20 10:01:36 power.c:244:set_customer_voltage_by_chain: chain[1] customer_voltage = 9.410217 2022-07-20 10:01:36 power.c:244:set_customer_voltage_by_chain: chain[2] customer_voltage = 9.410217 2022-07-20 10:01:36 power.c:1253:slowly_set_iic_power_voltage_t11: parallel set all chain to working voltage: now setting chain[0]-volt[09.58]-data[025] chain[1]-volt[09.58]-data[025] chain[2]-volt[09.58]-data[025] now setting chain[0]-volt[09.54]-data[026] chain[1]-volt[09.54]-data[026] chain[2]-volt[09.54]-data[026] now setting chain[0]-volt[09.51]-data[027] chain[1]-volt[09.51]-data[027] chain[2]-volt[09.51]-data[027] now setting chain[0]-volt[09.48]-data[028] chain[1]-volt[09.48]-data[028] chain[2]-volt[09.48]-data[028] now setting chain[0]-volt[09.45]-data[029] chain[1]-volt[09.45]-data[029] chain[2]-volt[09.45]-data[029] now setting chain[0]-volt[09.42]-data[030] chain[1]-volt[09.42]-data[030] chain[2]-volt[09.42]-data[030] 2022-07-20 10:01:53 power.c:1273:slowly_set_iic_power_voltage_t11: parallel set all chain to working voltage end! now setting chain[0]-volt[09.42]-data[030] chain[1]-volt[09.42]-data[030] chain[2]-volt[09.42]-data[030] 2022-07-20 10:04:56 eeprom.c:917:eeprom_get_inbalance_info: error: chain[0] inbalance num is 255, more than MAX_OFFSET 4 2022-07-20 10:04:56 driver-btm-soc.c:2498:is_domain_imbalance: eeprom info not correct! ret = 0, len = 0 2022-07-20 10:04:56 eeprom.c:917:eeprom_get_inbalance_info: error: chain[1] inbalance num is 255, more than MAX_OFFSET 4 2022-07-20 10:04:56 driver-btm-soc.c:2498:is_domain_imbalance: eeprom info not correct! ret = 0, len = 0 2022-07-20 10:04:56 eeprom.c:917:eeprom_get_inbalance_info: error: chain[2] inbalance num is 255, more than MAX_OFFSET 4 2022-07-20 10:04:56 driver-btm-soc.c:2498:is_domain_imbalance: eeprom info not correct! ret = 0, len = 0 2022-07-20 10:04:56 driver-btm-soc.c:2511:is_domain_imbalance: dumping inbalance domain info... 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2022-07-20 10:30:18 driver-btm-soc.c:3498:check_system_work: The avg rate is 17217 in 30 mins, PCB temperature between 42 ~ 78 2022-07-20 11:00:46 driver-btm-soc.c:3498:check_system_work: The avg rate is 17217 in 30 mins, PCB temperature between 44 ~ 79 2022-07-20 11:31:14 driver-btm-soc.c:3498:check_system_work: The avg rate is 17176 in 30 mins, PCB temperature between 44 ~ 79 2022-07-20 12:01:41 driver-btm-soc.c:3498:check_system_work: The avg rate is 17012 in 30 mins, PCB temperature between 45 ~ 81 2022-07-20 12:30:08 temperature.c:1206:process_status_value: Fatal Error: Temperature is too high! 2022-07-20 12:30:08 temperature.c:1104:disable_hash_board: disable_pic_dac as status_value 2 _______________________________________________________________________________________________________________________________________________________ MINER 2 Booting Linux on physical CPU 0x0 Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 203704K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25672K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090c424 (9234 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 12632K (cceab000 - cdb01000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Broadcom BCM5241 e000b000.etherne:00: attached PHY driver [Broadcom BCM5241] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAEAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 55/28, WL threshold: 4096, image sequence number: 1829452003 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): recovery needed UBIFS (ubi0:0): recovery completed UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 485E33AD-9810-4236-BC3F-EC2B8029B2A1, small LPT model ubi1: attaching mtd5 ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 4188/1443, WL threshold: 4096, image sequence number: 312704298 ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 ubi1: background thread "ubi_bgt1d" started, PID 720 UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 UBIFS (ubi1:0): recovery needed UBIFS (ubi1:0): recovery completed UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 9199417F-E7CC-414E-88E7-9E30BCF06064, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb38000 *base_vir_addr = 0xab00d In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized [2022-07-20 09:54:19.634] httpListenThread start ret=0 [2022-07-20 09:54:49.634] start listen on 6060 ... [2022-07-20 10:00:41.946] setStartTimePoint total_tv_start_sys=425 total_tv_end_sys=426 2022-07-20 09:54:19 driver-btm-soc.c:6520:bitmain_soc_init: This is Antminer S9 SE scan user version 2022-07-20 09:54:19 driver-btm-soc.c:6526:bitmain_soc_init: special mode: disabled 2022-07-20 09:54:19 driver-btm-soc.c:6533:bitmain_soc_init: This is high performance mode 2022-07-20 09:54:19 driver-btm-soc.c:6538:bitmain_soc_init: last commit version: 99791ac commit time: 2019-09-17 19:17:44 build: 2019-09-18 16:00:29 2022-07-20 09:54:19 driver-btm-soc.c:6559:bitmain_soc_init: Detect 256MB control board of XILINX 2022-07-20 09:54:19 driver-btm-soc.c:6562:bitmain_soc_init: Miner compile time: Wed Sep 18 15:51:07 CST 2019 type: Antminer S9 SE 2022-07-20 09:54:19 driver-btm-soc.c:839:check_chain: get_hash_on_plug is 0x7 2022-07-20 09:54:19 driver-btm-soc.c:851:check_chain: !! chain[0]is exist 2022-07-20 09:54:19 driver-btm-soc.c:851:check_chain: !! chain[1]is exist 2022-07-20 09:54:19 driver-btm-soc.c:851:check_chain: !! chain[2]is exist 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fc 28 fc ff 00000080 ff ff ff ff ff ff ff a0 58 58 58 58 58 58 58 58 00000090 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 000000a0 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 000000b0 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 000000c0 58 58 58 58 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff 71 15 00 00 20 ff ff ff 39 10 61 ae 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fc 28 fc ff 00000080 ff ff ff ff ff ff ff a0 58 58 58 58 58 53 58 51 00000090 58 55 53 55 58 58 51 58 58 58 58 58 55 58 58 53 000000a0 58 58 51 58 58 58 51 55 58 58 58 58 58 58 53 58 000000b0 58 58 58 58 58 58 58 55 53 51 51 53 55 58 58 58 000000c0 58 58 58 58 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff 13 15 00 00 20 ff ff ff 39 10 0b a0 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fb 28 fd ff 00000080 ff ff ff ff ff ff ff a0 58 58 58 58 58 55 53 51 00000090 4d 4d 58 55 53 51 4d 4d 58 58 58 58 58 58 58 58 000000a0 4d 4d 58 55 53 51 51 55 58 58 4d 53 4d 58 58 58 000000b0 58 58 58 58 58 55 53 51 4d 4d 4d 51 53 4d 55 58 000000c0 58 58 58 58 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff 8a 14 00 00 20 ff ff ff 39 10 90 2d read chain[0] hardware info: major type: 0 minor type: 4 chip level: 0 bom version: 0x10 pcb version: 0x39 fixture 8pattern result: L0 read chain[1] hardware info: major type: 0 minor type: 4 chip level: 0 bom version: 0x10 pcb version: 0x39 fixture 8pattern result: L0 read chain[2] hardware info: major type: 0 minor type: 4 chip level: 0 bom version: 0x10 pcb version: 0x39 fixture 8pattern result: L0 sweep config for eco mode: sweep_start_voltage: 8.60 max_aging_voltage: 8.90 sweep_min_freq: 300M sweep_max_freq: 380M sweep config for hpf mode: sweep_start_voltage: 9.20 max_aging_voltage: 9.50 sweep_min_freq: 415M sweep_max_freq: 465M 2022-07-20 09:54:31 driver-btm-soc.c:839:check_chain: get_hash_on_plug is 0x7 2022-07-20 09:54:31 driver-btm-soc.c:851:check_chain: !! chain[0]is exist 2022-07-20 09:54:31 driver-btm-soc.c:851:check_chain: !! chain[1]is exist 2022-07-20 09:54:31 driver-btm-soc.c:851:check_chain: !! chain[2]is exist 2022-07-20 09:54:31 driver-btm-soc.c:5965:get_freq_result_from_eeprom: orginal chip freq: chain 0 freq: 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 chain 1 freq: 440 440 440 440 440 415 440 405 440 425 415 425 440 440 405 440 440 440 440 440 425 440 440 415 440 440 405 440 440 440 405 425 440 440 440 440 440 440 415 440 440 440 440 440 440 440 440 425 415 405 405 415 425 440 440 440 440 440 440 440 chain 2 freq: 440 440 440 440 440 425 415 405 385 385 440 425 415 405 385 385 440 440 440 440 440 440 440 440 385 385 440 425 415 405 405 425 440 440 385 415 385 440 440 440 440 440 440 440 440 425 415 405 385 385 385 405 415 385 425 440 440 440 440 440 2022-07-20 09:54:31 driver-btm-soc.c:6647:bitmain_soc_init: reset all... 2022-07-20 09:54:33 driver-btm-soc.c:6655:bitmain_soc_init: miner ID : 8122e40618c08854 2022-07-20 09:54:33 driver-btm-soc.c:6359:init_miner_version: FPGA Version = 0xB00D 2022-07-20 09:54:52 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[0] PIC software version: 177 2022-07-20 09:54:53 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[1] PIC software version: 177 2022-07-20 09:54:54 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[2] PIC software version: 177 2022-07-20 09:54:54 power.c:185:power_init: power init ... 2022-07-20 09:54:54 driver-btm-soc.c:5060:get_working_voltage_from_eeprom: get working vol [ 9.50] from chain[0] eeprom 2022-07-20 09:54:54 power.c:232:set_working_voltage_by_chain: chain[0] working_voltage = 9.50 2022-07-20 09:54:54 driver-btm-soc.c:5060:get_working_voltage_from_eeprom: get working vol [ 9.50] from chain[1] eeprom 2022-07-20 09:54:54 power.c:232:set_working_voltage_by_chain: chain[1] working_voltage = 9.50 2022-07-20 09:54:54 driver-btm-soc.c:5060:get_working_voltage_from_eeprom: get working vol [ 9.50] from chain[2] eeprom 2022-07-20 09:54:54 power.c:232:set_working_voltage_by_chain: chain[2] working_voltage = 9.50 2022-07-20 09:54:54 driver-btm-soc.c:5754:update_highest_voltage: chain 0 hpf working voltage 9.20 2022-07-20 09:54:54 driver-btm-soc.c:5754:update_highest_voltage: chain 1 hpf working voltage 9.20 2022-07-20 09:54:54 driver-btm-soc.c:5754:update_highest_voltage: chain 2 hpf working voltage 9.20 2022-07-20 09:54:54 driver-btm-soc.c:5763:update_highest_voltage: open core at max voltage 9.94 2022-07-20 09:54:54 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[0] setting to highest voltage: 09.94 ... 2022-07-20 09:54:54 power.c:707:set_iic_power_by_voltage: now setting voltage to : 09.94 2022-07-20 09:54:54 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[1] setting to highest voltage: 09.94 ... 2022-07-20 09:54:57 power.c:707:set_iic_power_by_voltage: now setting voltage to : 09.94 2022-07-20 09:54:57 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[2] setting to highest voltage: 09.94 ... 2022-07-20 09:54:58 power.c:707:set_iic_power_by_voltage: now setting voltage to : 09.94 2022-07-20 09:54:58 driver-btm-soc.c:1188:get_eeprom_total_hash_rate: chain[0] hash rate = 5489 2022-07-20 09:54:58 driver-btm-soc.c:1188:get_eeprom_total_hash_rate: chain[1] hash rate = 5395 2022-07-20 09:54:58 driver-btm-soc.c:1188:get_eeprom_total_hash_rate: chain[2] hash rate = 5258 2022-07-20 09:54:58 driver-btm-soc.c:1192:get_eeprom_total_hash_rate: total rate = 16142 2022-07-20 09:54:58 driver-btm-soc.c:1200:get_ideal_hash_rate: get ideal hash rate 16000 2022-07-20 09:54:58 eeprom.c:669:travel_eeprom_store: chain[0] data in eeprom is: magic number: 0x7e freq data per ASIC: IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275 IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275 IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275 IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275 IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275 IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275 voltage: 11.10 V hash rate: -0001 GH/s freq data per ASIC in mode2: IC[000]:440 IC[001]:440 IC[002]:440 IC[003]:440 IC[004]:440 IC[005]:440 IC[006]:440 IC[007]:440 IC[008]:440 IC[009]:440 IC[010]:440 IC[011]:440 IC[012]: